Ricoh GEN4L 15PL Printhead (Hose barb)-MH2620

The Ricoh GEN4L printhead is suitable for a range of oil, water, solvent and UV printers, including the original D.Gen Teleios Grande, D.Gen Teleios (TJ-2600) and Teleios (TJ-3333). This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.

This printhead is not compatible with the newer D.Gen Teleios Grande G5 or Teleios Grande/H6. These printers use Ricoh GEN5 Printhead Water (PPHRI18045).

This head comes with hose barbs. The hose barbs can be removed if printhead with o-rings is needed. We recommend to change the head cables when installing a new printhead.

Droplet enlargement

This head is capable of jetting a variety of ink types in large droplet sizes. Please choose from two models to suit your application: Multi-drop 15-45pl (MH2620) or 27-54 pl (MH2820)

Heated operation up to 80ºC

The built-in heater heats the ink to up to 80ºC for jetting, providing support for high-viscosity inks.

Variable drop volume capability

The multi-drop capability allows the creation of a range of drop sizes enabling grey-scale printing.

Excellent durability and extended service life

Ricoh inkjet print heads are made of stainless steel. These heads are highly robust and offer excellent anti-corrosion properties for multiple inks, resulting in excellent durability and extended service life.

Support for different inks

With its built-in heater, these heads are capable of jetting high-viscosity inks. Additionally, the ink path is isolated from the actuator (piezo elements) , i.e. no ink contact.

Technical Specifications:

– Size: 13,2 x 120 x 75,5 mm (excluding cables)
– Head Materials: SST, Ni and Epoxy Adhesive (direct contact with ink)
– Nozzle Plate Surface: Non-wet coating
– Number of Nozzles: 2 x 192 nozzles
– Nozzle Spacing: 0,1693 mm
– Piezo Type: D33 Stacked PZT
– Temperature Control: Integrated Heater and Thermistor
– Operator Temperature range: Up to 80° C
– Native Drop Volume: 15 pl
– Drop Volume Range: 15-45 pl
– Jetting Frequency: Up to 30 kHZ
– Life: 100 billion actuations per nozzle

This printhead carries a manufacturer warranty. Country of origin : Japan

Printer compatibility:

AmicaSystems PA32

d.gen Teleios Grande (3333TX)

d.gen Teleios (TJ-2600)

d.gen Teleios Grande (TJ-3333)

d.gen Teleios XL (XL2600)

d.gen Artrix GTII

Weight	1 kg

There are no reviews yet.

Be the first to review “Ricoh GEN4L 15PL Printhead (Hose barb)-MH2620” Cancel reply

The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long. The version with short cable has been discontinued. The long cable version is used as an alternative. The printhead comes with hose barb ink inlet that can be removed in. case o-ring sealed ink inlet are required. This printhead corresponds to Ricoh part numbers N220792W, N220792S, N220792U or N220792E.